Andes Fence is a family-owned fence and gate company based in Davie, a short drive from Fort Lauderdale, and serving Broward County since 1994. We install and replace PVC vinyl, aluminum, wood, chain link and privacy metal fences, plus automatic driveway gates and railings, for homes and businesses across Fort Lauderdale.
Fort Lauderdale reviews every fence for both building code and zoning, and a fence that faces the street also needs a landscaped setback. We know the city’s checklist well and explain each step before work begins.
Call 954-792-1988 or request a free estimate. Se habla español.
A few of the fences and gates our crews have built across Broward County. Ask to see projects near your Fort Lauderdale neighborhood at your free estimate.
Swipe or use the arrows to see all 8 photos.
The City of Fort Lauderdale requires a building permit to build, change or replace a fence, and applications go through the city’s LauderBuild online portal. Each fence is reviewed by the Building and Zoning sections, plus Landscaping in most of the city, Electrical if a gate opener is wired in, and Engineering if the fence sits in an easement. Based on the city’s fence, wall and gate checklist, expect to provide:
Street-facing fences need a landscaped setback. In residential areas, a fence that faces the street must sit at least 3 feet back from the property line, with continuous hedges, shrubs and groundcover planted in front of it: shrubs about 2 feet tall and 2 feet apart, groundcover about 6 inches tall and 6 inches apart. The planting has to be shown on the site plan. We plan the fence line and the planting strip together so the permit isn’t held up.
Finished side out. The finished side of the fence must face the neighbor or the street. If both sides can be seen from a street, both must be finished.
Wood fences. The city’s code guidance for wood fences up to 6 feet calls for pressure-treated 4×4 posts set 2 feet deep in 10-inch concrete footings, at least three 2×4 rails, #2 grade lumber or better and corrosion-resistant fasteners. Premanufactured panels may need a product approval.
Pool fences. A fence that serves as a pool barrier must meet the Florida Building Code and the state pool safety act, with self-closing, self-latching gates. We confirm the required height and latch details for your property before installation.
Small-job permit exemption. Since July 1, 2026, some single-family work under $7,500 can be exempted from a building permit, but only with a written request approved by the city. Fences aren’t specifically listed, zoning and setback rules still apply, and properties in flood zones don’t qualify. We’ll tell you whether it’s worth asking for your project.
Rules change, so we confirm current requirements with the city for every project.
Sources: City of Fort Lauderdale Fence/Wall/Gate Permit Checklist and wood fence guidance, HB 803 permit exemption guide and ULDR Section 47-19.5, checked November 22, 2026. This is planning guidance; it does not replace the city’s review.
Rust-resistant and open, a strong fit for pool barriers, waterfront yards and front-of-home curb appeal.
No painting and no rot. A popular choice for backyard privacy.
Modern horizontal slats and custom welded designs for privacy and security.
A warm, natural look at a lower upfront cost, built to the city’s wood fence guidance.
Driveway gates for homes and businesses, with electrical permits handled as part of the job.
Aluminum railings for balconies, stairs, condos and commercial buildings.
Not sure which fits your property, HOA and budget? We’ll walk you through the options at your free estimate. For business and HOA properties, see our commercial fencing page.
Yes. The city requires a building permit to build, change or replace a fence, and it reviews the fence for zoning as well as building code.
Fort Lauderdale requires street-facing fences in residential areas to sit at least 3 feet back from the property line, with hedges, shrubs and groundcover planted in that strip. The planting must be shown on the site plan.
The city requires plans signed and sealed by a Florida-licensed architect or engineer for PVC and metal fences. Wood and chain link fences can instead follow the prescribed method in the Florida Building Code.
The finished side must face the neighboring property or the street. If both sides can be seen from a street, both sides must be finished.
Once the permit is approved, a standard backyard fence typically takes 1 to 2 days to install. The full timeline also includes permit review, any HOA approval and material lead times; we confirm the schedule for your project before work begins.
Yes. Our team offers free estimates and project updates in English or Spanish.
Tell us about your property and the fence you have in mind. We’ll visit, measure, explain the permit steps and give you a written estimate.
Call 954-792-1988 or request your free quote. Se habla español.
Serving Fort Lauderdale, Davie, Pembroke Pines and all 31 Broward County cities. Family-owned since 1994.