A horizontal aluminum fence can give a yard a clean, modern boundary while carrying the same design through a matching gate. For Broward County homeowners, the decision comes down to more than appearance: how much screening you want, how you use the entrance, and which design suits your property.
At Andes Fence, we help homeowners plan custom fences and gates with quality work and competitive pricing. This guide explains what to consider before requesting a horizontal slat fence quote.
What is a horizontal aluminum fence?
A horizontal aluminum fence uses slats that run side to side between posts, rather than upright pickets. The result is a series of straight lines that can complement contemporary homes, landscaping, and outdoor living areas.
Slat width, spacing, height, and frame design all change the finished appearance. A design with visible gaps can offer partial screening, while a more closed design can provide greater privacy. The word “horizontal” describes the orientation—not a guaranteed level of privacy.
Explore our aluminum fence and gate options to see how this material can fit different properties.
How much privacy will a horizontal slat fence provide?
Start with the view you want to screen. Is it a sidewalk, a neighboring patio, or a side entrance? The best design depends on where people will be standing and what they can see through the slats.
In the project photos shown here, the gaps between the slats allow some visibility. Landscaping adds screening, but the fence itself is not a solid privacy wall. That distinction matters when choosing a similar design for your yard.
- Slat spacing: Wider gaps leave more open views; closer spacing generally increases screening.
- Viewing angle: Look at the proposed design straight on and from the side.
- Fence height: Consider the areas you want to screen, subject to the requirements for your property.
- Landscaping: Hedges can complement the fence, but leave room for plant care and gate movement.
Tell us whether your priority is a modern boundary, partial screening, or greater privacy. That helps us recommend an appropriate layout instead of choosing a style from a photograph alone.
Plan the matching gate at the same time
A matching horizontal aluminum gate can make the entrance feel like part of the fence. Planning it early also helps avoid practical problems with access.
A walk gate may be enough for daily use, but lawn equipment, deliveries, or larger items may need a wider opening. Think about the largest item that needs to pass through—not just the way you normally enter the yard.
Discuss the opening width, swing direction, latch, hinges, and ground clearance before settling on the design. Nearby plants, walls, slopes, and walkways can affect how the gate operates. If you need a driveway entrance, ask about the appropriate configuration rather than assuming a pedestrian gate design can simply be enlarged.
Is aluminum a good choice for South Florida?
Aluminum is widely used in building applications because it combines relatively low weight with corrosion resistance. The Aluminum Association identifies both as reasons for its use in construction.
For a fence project, the finished system matters: the material, protective finish, fasteners, posts, and installation all deserve attention. Ask which finish is specified and what care instructions apply, particularly where the fence is exposed to salt, irrigation, or accumulated debris.
Follow the finish manufacturer’s cleaning guidance and check gate hardware periodically. Avoid assuming that “low maintenance” means the fence never needs cleaning or attention.
What affects horizontal aluminum fence installation cost?
A useful estimate should describe the fence you are actually buying. Two projects with the same total length can have different costs because their designs and site conditions differ.
- Total length and height: These affect the amount of material and work involved.
- Slat layout and fabrication: Slat dimensions, spacing, framing, and custom details change the scope.
- Gates: Quantity, opening size, configuration, and hardware should be listed clearly.
- Site access and existing fencing: Removal, disposal, access limitations, and changes in elevation may affect the work.
- Finish and project documentation: Compare the specified finish and clarify what documentation or approval work is included.
Rather than relying on a generic price per foot, compare written quotes for the same height, layout, gate sizes, finish, and installation scope. Ask what is included and which items, if any, are priced separately.
Before choosing a design in Broward County
Confirm the requirements that apply to your property with the appropriate local building department, and review any association requirements before committing to a layout. A design suitable for one address may need changes at another.
If the fence will be used around a pool, identify that at the start. A decorative fence photograph does not establish that a particular fence or gate is suitable as a pool barrier. Likewise, do not judge a fence’s wind performance by the material name or appearance alone; ask what documentation applies to the proposed system.
For an initial conversation, it helps to have your city, a few photos of the proposed fence area, your preferred style, and an approximate length if you know it. You do not need to know every specification before contacting us.
Frequently asked questions
Can horizontal aluminum fencing provide complete privacy?
It depends on the design. A fence with gaps between the slats provides partial screening rather than complete visual separation. Discuss your privacy needs before selecting spacing and panel details.
Can the gate match the fence?
Yes. Andes Fence can discuss a matching gate as part of your custom fence project. Opening size, hardware, and operating clearance should be planned alongside the panels.
Can you quote a project in my Broward city?
We serve Broward County from our Davie business location. Include your city and project details in your inquiry so our team can discuss the work and next steps.
Do I need to choose an appointment time online?
No. Submit your project information and our team will call you to discuss your request and arrange the next step.
Request a horizontal aluminum fence quote
Ready to discuss a modern fence or matching gate for your Broward County property? Andes Fence is a family-owned, licensed and insured company serving South Florida since 1994.
Tell us your city, the style you like, and how you plan to use the space. We will help you work through the options with a focus on quality and competitive pricing.
Request a free quote · Chat with us on WhatsApp · Call 954-792-1988
Se habla español.